er25

Your Source for Automatic Drills, Multiple Spindle Heads, and more

Direct Drive AutoDrill Selfeeder Style Unit

For many, many years, self feeding automatic drills have been sold by a number of companies around the world.

A few years ago, AutoDrill entered the arena and has taken off.

AutoDrill’s production drilling solutions solve the problem that most shops eventually have – efficiency!

Whether they are too busy to keep up or facing tough times, companies often need to become more efficient.  AutoDrills line of single spindle and multi-drill products do just that – they bring an efficient answer to an often complex pattern of problems.

Direct Drive AutoDrill V2

Direct Drive AutoDrill V2

Direct Drive AutoDrill

Direct Drive AutoDrill

The unit shown above is only one of many models sold by AutoDrill.  It is a direct drive model where the input:output ratio is 1:1 for the motor:drill set-up.  What does this mean?  Well, for most people, it simply means a slim, compact but powerful drill.  For others, it means that a VFD or inverter set-up can be used to infinitely adjust the RPM rate for the machine while it performs it’s process.

With reversing motors, rigid or radial/linear float tap processes can be performed.

This unit can be driven by single phase, three phase, special voltage/type motors, air or even hydraulic drive motors.

Whether you need to drill a single hole on many parts or drill many holes in a complex pattern, AutoDrill likely has a solution to help you. Above and beyond that, we specialize in providing world class support so that even if we can not directly help you, we likely know who can.
Please CONTACT US to discuss your application and receive prompt product cost, literature and technical help. We look forward to serving you as best as we can.  Your success is our success!

The Future of Automatic and Gang Drilling is AutoDrill

With many of our competitor’s deciding to scale back or even shut down operations, we stand here ready to serve you and your company’s production drilling needs.

Our competitors often sell outdated, inefficient machines.  We sell only the most modern and efficient designs.

The remaining major competitors to AutoDrill are either overpriced, overseas, or sometimes both!  We keep everything except custom drilling heads and devices in stock at all times.

 

2240 With 2 Spindle Multi-Drill Spindle

2240 With 2 Spindle Multi-Drill Spindle

2140-1 with Key-Type Chuck

2140-1 with Key-Type Chuck

Please CONTACT US to discuss your application and receive prompt product cost, literature and technical help.

Mini Hex Nuts for ER Style Heads

Recently, a customer needed a multiple spindle head for closely spaced holes. However, their shop really did not like using standard mini hex nuts (ER8m, ER11m, ER16m, ER20m, ER25m).

AutoDrill sought out a vendor who could make a hex style nut to go on the fine threads of an mini-nut style spindle.  Success!

 

Hex Style ER Mini-Nut

Hex Style ER Mini-Nut

Please CONTACT US to discuss your application and receive prompt product cost, literature and technical help.