Blog

Your Source for Automatic Drills, Multiple Spindle Heads, and more

Suggested Drilling Feed Rates

June 12th, 2012

posted by AutoDrill

suggesteddrillingfeedrateschart.pdf

Suggested Drilling Feed Rates (inches per rev.)
MATERIAL BRINELL    HARDNESS HOLE DIAMETER
1/16″ 1/8 1/4 1/2 3/4 1 1 1/2 2
Aluminum 99-101 .001 .003 .007 .012 .016 .020 .025 .030
Aluminum Bronze 170-187 .001 .003 .004 .008 .010 .012 .015 .020
Balkelite – .002 .005 .006 .008 .010 .012 .015 .015
Brass 192-202 .001 .003 .004 .008 .012 .018 .020 .022
Bronze, Common 166-183 .001 .003 .004 .008 .012 .018 .020 .022
Bronze Phos.; 1/2 Hard 187-202 .001 .003 .004 .008 .010 .012 .015 .020
Bronze Phos.; Soft 149-163 .001 .003 .004 .008 .012 .018 .020 .022
Celluloid – .002 .004 .005 .006 .006 .008 .008 .010
Copper 80-85 .001 .003 .004 .008 .010 .012 .015 .020
Copper Mang.; 30% Mn 134 .001 .003 .005 .007 .009 .012 .014 .016
Duralumin 90-104 .001 .003 .005 .010 .015 .018 .020 .025
Iron, Cast; Med Soft 196 .001 .003 .005 .008 .010 .012 .014 .015
Iron, Cast; Hard 293-302 – .001 .003 .005 .007 .009 .012 .012
Iron, Cast; Chilled 402 – .001 .003 .005 .007 .009 .011 .011
Iron, Malleable 112-126 – .002 .004 .007 .010 .012 .015 .018
Monel 149-170 – .002 .003 .006 .008 .010 .012 .015
Nickel, Pure 187-202 – .002 .003 .006 .008 .015 .018 .020
Nickel, Steel; 3 1/2% 196-241 – .002 .003 .006 .008 .010 .012 .015
Rubber, Hard – .005 .010 .012 .015 .018 .020 .025 .030
Screw Stock, C.R. 170-196 .001 .003 .004 .007 .010 .012 .015 .018
Stl, Carbon 175-225 .001 .003 .004 .007 .010 .012 .015 .018
Stl, Drop Forged 170-196 .001 .002 .004 .007 .010 .012 .015 .018
Stl, Machinery 170-196 .001 .003 .005 .009 .012 .013 .018 .022
Stl, Magnet; Soft 241-302 – .002 .003 .006 .008 .009 .010 .011
Stl, Magnet; Hard 321-512 – .0005 .001 .002 .002 .003 .003 .004
Stl, Mang.; 7-13% 187-217 – .0005 .001 .002 .002 .003 .003 .004
Stl, Mild; .20-.30C 170-202 .001 .003 .005 .010 .015 .018 .020 .025
Stl, Molybdenum 196-235 – .002 .004 .006 .010 .012 .015 .018
Stl, Spring 402 – .002 .003 .005 .007 .009 .010 .010
Stl, Stainless 150-225 .001 .002 .004 .006 .008 .011 .013 .016
Stl, Stainless 460-520 – .0005 .001 .002 .002 .003 .003 .004
Stl, .40-.50C 170-196 .001 .002 .004 .007 .010 .012 .015 .018
Stl, Struct; A-36 160 .001 .003 .005 .010 .015 .018 .020 .025
Stl, Tool; SAE, Forged 149 – .002 .003 .006 .009 .011 .014 .016
Stl, Tool; SAE, Forged 402 – .0005 .001 .002 .002 .003 .003 .004
Zinc, Alloy 112-126 .002 .003 .007 .012 .016 .018 .020 .025

Comments are closed.

Contact Information

AutoDrill
1221 U.S. Highway 22 (Suite 6A)
Lebanon, NJ 08833
Ph. 800-871-5022
Fax: 908-542-0242
Intl. 01.908.542.0244
Email: Sales@Drill-HQ.com

Pages